Hi all,

Recently I've been working with recommender systems and association analysis. This last one, specially, is one of the most used machine learning algorithms to extract from large datasets hidden relationships.

The famous example related to the study of association analysis is the history of the baby diapers and beers. This history reports that a certain grocery store in the Midwest of the United States increased their beers sells by putting them near where the stippers were placed. In fact, what happened is that the association rules pointed out that men bought diapers and beers on Thursdays. So the store could have profited by placing those products together, which would increase the sales.

Association analysis is the task of finding interesting relationships in large data sets. There hidden relationships are then expressed as a collection of association rules and frequent item sets. Frequent item sets are simply a collection of items that frequently occur together. And association rules suggest a strong relationship that exists between two items. Let's illustrate these two concepts with an example.

A list of transactions from a grocery store is shown in the figure above. Frequent items are a list of items that commonly appear together. One example is {wine, diapers, soy milk}. From the data set we can also find an association rule such as diapers -> wine. This means that if someone buys diapers, there is a good chance they will buy wine. With the frequent item sets and association rules retailers have a much better understanding of their customers. Although common examples of association rulea are from the retail industry, it can be applied to a number of other categories, such as web site traffic, medicine, etc.

How do we define these so called relationships ? Who defines what is interesting ? When we are looking for frequent item sets or association rules, we must look two parameters that defines its relevance. The

*of an itemset, which is defined as the percentage of the data set which containts this itemset. From the figure above the support of {soy milk} is 4/5. The support of {soy milk, diapers } is 3/5 because of the five transactions, three contained both soy milk and diapers. Support applies to an itemset, so we can define a minimum support and only get the itemsets that meet that minimum support. And the***support****cofidence**which is defined for an association rule like diapers->wine. The confidence for this rule is defined as support({ diapers, wine})/ support(diapers). From the figure above, support of {diapers, wine} is 3/5. The support for diapers is 4/5, so the confidence for diapers -> wine is: 3/4 = 0.75. That means in 75% of the items in our data set containing diapers our rule is correct.
The support and confidence are ways we can quantify the success of our association analysis. Let's assume we wanted to find all sets of items with a support greater than 0.8. How would we do that ? We could generate a list of every combination of items then go and count how frequent that occurs. But this is extremely slow when we have thousands of items for sale. In the next section, we will analyze the Apriori principle which address this problem and reduces the number of calculations we need to do to learn association rules.

To sum up, one example of rule extracted from associatio analysis:

"If the client bought the product A1 and the product A4, so he also bought the product A6 in 74% of the cases. This rule applies on 20% of the studied cases."

The first parameter is the support, that is, the percentage of cases that the product A1 appears in the frequent item sets. In the rule above, the value 20% points the support, which reports that the rule is applied on 20% of the studied cases. The second parameter is the confidence, which tells the percentage of occurrences of the rule. So the value 74% represents the confidence, where in the 20% of the rules where products A1 and A4 are found, 74% of them we also can find the product A6.

**Apriori Algorithm**

Let's assume that we are running a market store with a very limited selection. We are interested in finding out which items were purchased together. We have only four items: item0, item1, item2 and item3. What are all the possible combinations that can be purchased ? We can have one item, say item0 alone, or two items, or threee items, or all of the items together. If someone purchased two of item0 and four of item2, we don't care. We are concerned only that they purchased one or more of an item.

A diagram showing all possible combinations of the items is shown in the figure above. To make easier to interpret, we only use the item number such as 0 instead of item0. The first set is a big Ø, which means the null set or a set containing no items. Lines connecting item sets indicate that two or more sets can be combined to form a larger set.

Remember that our goal is to find sets of items that are purchased together frequently. The support of a set counted the percentage of transactions that contained that set. How do we calculate this support for a given set, say {0,3}? Well. we go through every transaction and ask, ”Did this transaction contain 0 and 3?” If the transaction did contain both those items, we increment the total. After scanning all of our data, we divide the total by the number of transactions and we have our support. This result is for only one set: {0,3}. We will have to do this many times to get the support for every possible set. We can count the sets in Figure below and see that for four items, we have to go over the data 15 times. This number gets large quickly. A data set that contains N possible items can generate 2N-1 possible itemsets. Stores selling 10,000 or more items are not uncommon. Even a store selling 100 items can generate 1.26*1030 possible itemsets. This would take a very, very long time to compute on a modern computer.

To reduce the time needed to compute this value, researchers identified something called the

**Apriori principle**. The Apriori principle helps us reduce the number of possible interesting itemsets. The Apriori principle is: if an itemset is frequent, then all of its subsets are frequent. In Figure below this means that if {0,1} is frequent then {0} and {1} have to be frequent. This rule as it is doesn’t really help us, but if we turn it inside out it will help us. The rule turned around reads: if an itemset is infrequent then its supersets are also infrequent, as shown in Figure below.
As you can observe, the shaded itemset {2,3} is known to be infrequent. From this knowledge, we know that itemsets {0,2,3}, {1,2,3}, and {0,1,2,3} are also infrequent. This tells us that once we have computed the support of {2,3}, we don’t have to compute the support of {0,2,3}, {1,2,3}, and {0,1,2,3} because we know they won’t meet our requirements. Using this principle, we can halt the exponential growth of itemsets and in a reasonable amount of time compute a list of frequent item sets.

**Finding frequent item sets**

Now let's go through the Apriori algorithm. We first need to find the frequent itemsets, then we can find association rules. The Apriori algorithm needs a minimum support level as an input and a data set. The algorithm will generate a list of all candidate itemsets with one item. The transaction data set will then be scanned to see which sets meet the minimum support level. Sets that do not meet the minimum support level will get tossed out. The remaining sets are then combined to make itemsets with two elements. Again, the transaction data set will be scanned and itemsets not meeting the minimum support level will get tossed. This procedure is repeated until all sets are tossed out.

We will use Python with Scipy and Numpy to implement the algorithm. The pseudocode for the Apriori Algorithm would look like this:

*While the number of items in the set is greater than 0:*

*Create a list of candidate itemsets of length k*

*Scan the dataset to see if each itemset is frequent*

*Keep frequent itemsets to create itemsets of length k+1*

The code in Python is shown below:

The source is docummented so you can easily understand all the rules generation process.

Let's see in action ?!

First, we created our first candidate item set C1. C1 contains a list of all items in frozenset. After we created D, which is just a dataset in the form of list of sets (set is a list of unique elements). With everything in set form we removed items that didn't meet our minimum support. So in our example 0.5 was the minimum support level chosen. The result is represented by the list L1 and support_data. These four items that make our list L1 are the sets that occur in at least 50% of all transactions. Item 4 didn't make the minimum support level, so it's not a part of L1. By removing it, we have removed more work we needed to do when wen find the list of two-item-sets. Remember our pruned tree above?!

Two more functions now were used: apriori() and aprioriGen(). In apriori() given a data set and a support level, it will generate a list of candidate itemsets. AprioriGen() is responsible for generate the next list of candidate itemsets and scanD throw out itemsets that don't meet the minimum support levels. See the result of aprioriGen() it generates six unique two-item-sets. If we run it with our apriori function we will check that L contains some lists of frequent itemsets that met a minimum support of 0.5. The variable support_data is just a dictionary with the support values of our itemsets. We don't care about those values now, but it will be useful in the next section. We have now which items occur in 50% of all transactions and we can begin to draw conclusions from this. In the next section we will generate association rules to try to get an if-then understanding of the data.

**Mining association rules from frequent item sets**

We just saw how we can find frequent itemsets with Apriori Algorithm. Now we have to find the association rules. To find them, we first start with a frequent itemset. The set of items is unique, but we can check if there is anything else we can get out of these items. One item or one set of items can imply another item. From the example above, if we have a frequent itemset: {soy milk lettuce}, one example of an association rule is: soy milk -> lettuce. This means if someone purchases soy and milk, then there is a statistically significant chance that he will purchase lettuce. Of course this is not always true, that is, just because soy milk -> lettuce is statistically significant, it does not mean that lettuce -> soy milk will be statistically significant.

We showed the support level as one measurement for quantifying the frequency of an itemset. We also have one for association rules. This measurement is called the confidence. The confidence for a rule P-> H is defined as: support (P|H)/support(P). Remember that the | symbol is the set union. P|H means all the items in set P or in set H. We already have the support values for all frequent itemsets provided in apriori function, remember ? Now, to calculate the confidence, all we have todo is call up those support values and do one divide.

From one frequent itemset, how many association rules can we have ? If you see the figure below, it shows all the different possible associations rules from the itemset {0, 1, 2, 3}. To find relevant rulese, we simply generate a list of possible rules, then test the confidence of each rule. If the confidence does not meet our minimum requirement, then we throw out the rule.

Usually we don't this. Imagine the number of rules if we have a itemset of 10 items, it would be huge. As we did with Apriori Algorithm we can also reduce the number of rules that we need to test. If the rule does not meet the minimum confidence requirement, then subsets of that rule also will not meet the minimum. So assuming that the rule 0,1,2 -> 3 does not meet the minimum confidence, so any rules where is subset of 0,1,2 ->3 will also not meet the minimum confidence.

By creating a list of sets with one item on the right hand size, testing them and merging the remaining rulese, we can create a list of rules of two items and do this recursively. Let's see the code below:

Let's see in action:

As you may seen in the fist call, it gives us three rules: {1} -> {3} , {5} -> {2} and {2} -> {5}. It is interesting to see the rules with 2 and 5 can be flipped around, but not the rule with 1 and 3. If we lower the confidencer threshold to 0.5, we may see more rules. Let's go now to a real-life dataset and see how it does work.

**Courses at Atepassar.com**

It's time to see these tools on a real life dataset. What can we use ? I love educational data, so let's see an example using the Atepassar social network data. Atepassar is a popular social-learning environment where people can organzie the studies for public exams in order to get a civil job. I work there as Chief Scientist!

The data set provided can give us some interesting insights about the profiles of the users who buys on-line courses at Atepassar. So we will use the apriori() and generateRules() functions to find interesting information in the transactions.

So let's get started. First I will create a transaction database and then generate the list of frequent itemsets and association rules.

So let's get started. First I will create a transaction database and then generate the list of frequent itemsets and association rules.

**Collect Dataset from Atepassar.**

So let's get started. First I will create a transaction database and then generate the list of frequent itemsets and association rules.

I have encoded some information related to our transactions, for example, the client's user profile such as state, gender and degree. I also extracted the bought courses and the category of the course such as 'national', 'regional', 'state' or 'local'.

This give us important hypothesis to test like "Male people buy more preparation courses for national exams?", "People from Sao Paulo tends to buy more for state exams ?" or even if male people graduated buys courses for 'local' exams ?" Those are some examples of explanations that we may get with association analysis.

After loading my dataset we can see inside each transaction:

Let's see one of them in order to explain it:

So one transaction is composed by a woman who bought a preparation course for a national exam (Brazilian exam) and lives at Distrito Federal (DF).

Now, let's use our Apriori algorithm. But first let's make a list of all the transactions. We will throw out the keys, which are the usernames. We are not interested in that. What we are interested is the items and associations among them. Now let's going to mine the frequent itemsets and association rules.

Applying the Apriori algorithm developed earlier, and use support settings of 5%, we may see several of frequent itemsets.

Now let's try to generate the association rules. We begin with minimum confidence of 70%.

If we increase the confidence even more, we don't see any rules at all. That means lots of distinct transactions or small amount of data unfortunately.

I will be with confidence of 70%. So we have the following rules:

What can we say about those insights ? Do you remember the support level of 5% ? That means that the rules above show up in at least 5% of all transactions. To sum up, we are going to see these association rules in at least 5% of the transactions, and in the case of DF --> Nacional, this rule is right 83,8% of the time. People from Brasilia really purchase for better positions in the government, or even get the best salaries!

**Conclusions**

In this post I presented one of the most traditional tools in data mining to find interesting relationships in a large set of data. We saw that there are two ways we can quantify the relationships: using frequent itemsets, which shows items that commonly appear in the data together. And the second one are the association rules which imply an if -> t hen relationship between items.

But wait, before start using it at your dataset, I have to give sou some warnings. Finding different combinations of items can be a very consuming task and expensive in terms of computer proccessing. So you will need more intelligent approaches to find frequent itemsets in a small amount time. Apriori is one approach that tries to reduce the number of sets that are chacked against the dataset. With Support measure and Confidence we can combine both to generate association rules.

The main problem of Apriori Algorithm is it requires to scan over the dataset each time we increase the length of our frequent itemsets. Imagine with a huge dataset, it can slow down the speed of finding frequent itemsets. Alternative techniques for this issue is the FP-Growth algorithm, for example. It only needs to go over the dataset twice, which can led to a better performance.

I hope you enjoyed this article, the first of 2013!

Regards,

Marcel Caraciolo

But wait, before start using it at your dataset, I have to give sou some warnings. Finding different combinations of items can be a very consuming task and expensive in terms of computer proccessing. So you will need more intelligent approaches to find frequent itemsets in a small amount time. Apriori is one approach that tries to reduce the number of sets that are chacked against the dataset. With Support measure and Confidence we can combine both to generate association rules.

The main problem of Apriori Algorithm is it requires to scan over the dataset each time we increase the length of our frequent itemsets. Imagine with a huge dataset, it can slow down the speed of finding frequent itemsets. Alternative techniques for this issue is the FP-Growth algorithm, for example. It only needs to go over the dataset twice, which can led to a better performance.

The code in Python is shown here.

I hope you enjoyed this article, the first of 2013!

Regards,

Marcel Caraciolo

Small typo: "And the *cofidence* which is defined"

ReplyDeleteExcellent article. Another typo: "threee"

ReplyDeleteCan you explain the last association rule you concluded, "People who are male lives at Minas Gerais and buys courses for national exams" => Graduated. All I see in the output is "frozenset(masculino), frozenset(nacionado), .736

ReplyDeleteDoesn't that only imply that if you are male you chose national courses. Where does the Minas Gerais fit in and where does the implication of graudated fit into that one.

Thanks.

For didatic purposes I didn't put all the rules genereated by the algorithm ApexDodge. However based on what's is shown you correct to say that it''s not implied!

ReplyDeleteExcellent article.

ReplyDeleteNice Article.good job and code is helpful...

ReplyDeletedata mining several algorithms that are

involved in generating association rules such as: Apriori, Eclat and FP-Growth..

The Role of Association Rules in Data Mining

PLEASE NOTE:

ReplyDeleteThe majority of this article (explanation, figures and code) has been plagiarized directly from

Chapter 11 of:

Machine Learning in Action, by Peter Harrington, Manning Press, 2012.

You should be careful and/or at least cite the source.

Wow, yeah. This is a straight rip-off from the book, Including most of the images.

Deletei need to transform my data because they have form loke pairs (a,b). and i hope to find association rule with item as pairs

ReplyDeleteBrilliant article. Thank you very much for posting this.

ReplyDeleteexcellent tutorial,, a small typo mistake though ,,I think a dataset contains N items can generate 2**N - 1 (excluding none) instead of 2N - 1, under explanation of Apriori Algorithm.

ReplyDeleteplz visit this site to know deta entry project http://dataentryhelp.com/

ReplyDeleteWIZTECH Automation, Anna Nagar, Chennai, has earned reputation offering the best automation training in Chennai in the field of industrial automation. Flexible timings, hands-on-experience, 100% practical. The candidates are given enhanced job oriented practical training in all major brands of PLCs (AB, Keyence, ABB, GE-FANUC, OMRON, DELTA, SIEMENS, MITSUBISHI, SCHNEIDER, and MESSUNG)

ReplyDeletePLC training in chennai

Automation training in chennai

Best plc training in chennai

PLC SCADA training in chennai

Process automation training in chennai

Final year eee projects in chennai

VLSI training in chennai

Embedded system training: Wiztech Automation Provides Excellent training in embedded system training in Chennai - IEEE Projects - Mechanical projects in Chennai. Wiztech provide 100% practical training, Individual focus, Free Accommodation, Placement for top companies. The study also includes standard microcontrollers such as Intel 8051, PIC, AVR, ARM, ARMCotex, Arduino, etc.

ReplyDeleteEmbedded system training in chennai

Embedded Course training in chennai

Matlab training in chennai

Android training in chennai

LabVIEW training in chennai

Robotics training in chennai

Oracle training in chennai

Final year projects in chennai

Mechanical projects in chennai

ece projects in chennai

This comment has been removed by the author.

ReplyDeleteData mining and with several other activities been tested by them this will indeed be a very good idea to have something to our hand before we actually go to examine anything. what is alphanumeric data entry

ReplyDeleteThanks for sharing this informative blog.

ReplyDeletePython Training in NoidaPython Interview Questions

Python Online Quiz

Machine Learning Tutorial

Wiztech Automation is the Leading Best quality PLC, Scada, DCS, Embedded, VLSI, PLC Automation Training Centre in Chennai. Wiztech’s Industrial PLC Training and the R & D Lab are fully equipped to provide through conceptual and practical knowledge aspects with hands on experience to its students.

ReplyDeletePLC training in Chennai

PLC training institute in Chennai

PLC training centre in Chennai

PLC, SCADA training in Chennai

Automation training in Chennai

DCS training in Chennai

It seems like there is mistake with the aprioriGen function.

ReplyDeleteBecause in python frozensets are not ordered by principle it may happen that by retrieving the n-1 elements from a candidate the slice will contain different values then when ordered before:

Consider to candidates:

[A, B, C]

[A, B, D]

Slice them

[A,B]

[A,B]

And take all elements in a new candidate:

[A, B, C, D]

but when not orderd before slicing:

[A, C, B]

[A, B, D]

Then:

[A, C] is not equal to [A,B] and no candidate is created while it should.

Therefore, I edited my code into:

def aprioriGen(freq_sets, k):

"Generate the joint transactions from candidate sets"

retList = []

lenLk = len(freq_sets)

for i in range(0,lenLk):

for j in range(i + 1, lenLk):

L1 = list(freq_sets[i])

L2 = list(freq_sets[j])

L1.sort()

L2.sort()

L1 = L1[:k - 2]

L2 = L2[:k - 2]

if L1 == L2:

retList.append(freq_sets[i] | freq_sets[j])

return retList

hi, The article is excellent and quit informative....I am learing Python...I want to implement Apriori algorithm....

ReplyDeleteI copied all the functions and pasted in IN[1] cell and tried to run it...

unable to find location where I type

" import apriori

dataset = apriori.load_dataset

dataset"

I am using Anaconda Python software...

Thank You

Hi.. thanks for your blog. Your script has helped me learn association analysis in python. Instead of using the sample data, can you help in importing a transaction dataset (CSV format) in the load_dataset()? I am starting to learn Python. So request your help whenever you have time... Thanks!

ReplyDeleteGreat Article...thanks for sharing in this useful blog..keep it up...

ReplyDeletePLC training in Cochin, Kerala

Automation training in Cochin, Kerala

Embedded System training in Cochin, Kerala

VLSI training in Cochin, Kerala

PLC training institute in Cochin, Kerala

Embedded training in Cochin, Kerala

Best plc training in Cochin, Kerala

Great article. Could you please share if you know of any stable Python packages for Sequence rule mining algorithms for real time projects? Thanks

ReplyDeleteHi there I am so thrilled I found your website, its a fantastic post , Besant technology offerPython training in chennai

ReplyDeleteAppreciation for really being thoughtful and also for deciding on

ReplyDeletecertain marvelous guides most people really want to be aware of.

Selenium Training in Bangalore

Thanks for one marvelous posting! I enjoyed reading it; you are a great author. I will make sure to bookmark your blog and may come back someday. I want to encourage that you continue your great posts, have a nice weekend!

ReplyDeleteJava Training in Bangalore|

Thank you a lot for providing individuals with a very spectacular possibility to read critical reviews from this site.

ReplyDeleteJava training in bangalore

Whoa! I’m enjoying the template/theme of this website. It’s simple, yet effective. A lot of times it’s very hard to get that “perfect balance” between superb usability and visual appeal. I must say you’ve done a very good job with this. DevOps Training in Bangalore

ReplyDeleteThanks a lot very much for the high quality and results-oriented help. I won’t think twice to endorse your blog post to anybody who wants and needs support about this area. Besant Technologies offers the best Core Java Training in Bangalore

ReplyDeleteNICE BLOG!!! Thanks for sharing useful information about Besant Technologies and being one of best AWS Training institute in Chennai we agree that this blog is very useful for the students who are searching for best software courses,

ReplyDeleteAWS Training in Chennai I would really like to come back again right here for like wise good articles or blog posts.

Very Nice Blog on Machine learning and Data Mining - Association Analysis with Python

ReplyDeleteIf you want explore about Devops

Devops Training in Bangalore

very nice blog keep posting python training in bangalore

ReplyDeleteblockchain training in bangalore

Very Nice Article Thanks for sharing

ReplyDeleteIteanz

Iot Training in Bangalore

Nice Blog on Machine Learning and Data Mining:

ReplyDeleteDevops Training in Bangalore

I got very nice blog artificial intelligence training in bangalore

ReplyDeleteNice Blog

ReplyDeleteIot Training in Bangalore

Iteanz

Artifiacial Intelligence Training in Bangalore

Iot Interview Questions

usefull article. Thanks for sharing

ReplyDeletenice blog

ReplyDeleteMachine learning training

useful article Linux interview questions

ReplyDeleteIt’s great to come across a blog every once in a while that isn’t the same out of date rehashed material. Fantastic read.

ReplyDeleteBesant technologies Marathahalli

very nice blog it was useful

ReplyDeletevery nice blog It was useful

ReplyDeleteGreat article and very use full for me. Thanks for sharing

ReplyDeleteAWS Training institute in chennai

Very Informative blog with really helpful images.Thank you.

ReplyDeleteBest Python Training in Banaglore by myTectra.

myTectra is the Marketing Leader In Banaglore Which won Awards on 2015, 2016, 2017 for best training in Bangalore

For Python related course please follow the link below.

python interview questions

python online training

Thanks for this post. phd thesis help in Delhi

ReplyDeleteA debt of gratitude is in order for one superb posting! I delighted in understanding it; you are an incredible creator. I will make a point to bookmark your blog and may return sometime in the not so distant future. I need to energize that you proceed with your awesome posts, have a decent end of the week!

ReplyDeleteData Science

Thank you for this article. It will be useful to start with data mining.

ReplyDeleteGreat Post. i have read your blog.It was interesting.Keep it upThank you so much for sharing that valuable article.. get more Inventory Audit | Vendor Reconciliation | Customer Helpdesk

ReplyDeleteMaster the essentials of machine learning and algorithms to help improve learning from data without human intervention.AWS Authorized Training Partner chennai

ReplyDelete